LEATHER COAT MARINE
NANO CERAMIC COATING FOR MARINE LEATHER PROTECTION
150mL / Durability up to 1 Season
It is crucial to take care of not only the exterior of your boat but also the interior. Saltwater especially wears out leather surfaces in a short time. Our leather protection solution LeatherCoat Marine is a transparent nano leather protector that can be applied to genuine and artificial leather surfaces, preventing paint transfer and ensuring minimal wear.
Stain
Free
Chemical & UV
Resistant
High
Hydrophobic
OUTSTANDING CARE FOR LEATHER SURFACES
By bringing water and oil repellency to the surface, this leather care product prevents the surface from salt, dirt, and stains. It protects against color fading caused by the sun and leather deformation that can occur over time. Nasiol LeatherCoat Marine will help you extend your leather's life and protect the surface against chemicals and UV rays.
High hydrophobic and oleophobic properties
Ultra-durable and protective formula
High chemical and UV resistance
Rejuvenates the artificial and genuine leather surface
Environmentally friendly technology
Why LeatherCoat Marine?
High hydrophobic and oleophobic properties
Ultra-durable and protective formula
High chemical and UV resistance
Rejuvenates the artificial and genuine leather surface
Environmentally friendly technology
APPLICATION SURFACES
LeatherCoat Marine can be applied to Natural leather, artificial leather, PU leather, and PVC leather surfaces of marine vehicles’ seats. Do not apply to plastic parts, painted surfaces, glass surfaces, or textiles/fabrics
LEATHERCOAT APPLICATION AND SPECIFICATIONS
Click to Download PDF
APPLICATION
- Surfaces should be dry and free of any dust, wax, oil, grease and other contamination. Consumption amount is 35-45 mL/m2 for genuine leather and 30-40 mL/m for artificial leather. Do not use it excessively. Gently shake the product bottle before use.
- Pour the product from the standard Nasiol LeatherCoat Marine bottle onto the applicator cloth placed on the applicator block and spread it homogeneously with horizontal and vertical movement to the surface. Make sure that there are no dry areas. Wait for 24 hours for drying and curing period. Throughout the curing time, keep the coated surface away from direct sunlight, excessive dust, water, and other contaminants. In case of an accidental application to surfaces other than the specified ones, the surface should be wiped.
NASIOL NL272 SPECIFICATIONS
| Packaging | 150mL |
| Durability | Up to 1 Year |
| Chemical Resistance | 11>pH>2 |
| Salt Water Resistance | Yes |
| Moisture Resistance | Yes |
| Dry Film Thickness | 700-1000 nm |
| Density @23°C | 0.86 g/cm3 |
| pH Value | 5-5.5 |
| Application Temperature | 5°C-30°C ( 50% RH) |
| Temperature Durability | 150°C |
| Water Contact Angle | 135° @10 μL |
| Water Contact Angle After “2000 Wet Scrub (ISO-11998:2006) |
117° @10 μL |
| Water Sliding Angle | 18° @20 μL |
| Oil Contact Angle | 105° @10 μL |
| Dry-to-Touch Time | 2h |
| REACH Compliance | Yes |
Click to Buy
Submit your review | |
LeatherCoat Marine
Average rating: 0 reviews
